clickPAN-SERVO triggers the shutter of cameras with no remote control and operates a servo motor together. Originally designed for autoKAP where a camera
is allowed to rotate and take pictures whilst flying below a kite, it can be
used with kites, balloons, and any application where a camera is
"hung" in a location where the operator cannot access the
The unit can be used with a 5second and 10second delay between shutter /
servo sequences. The pan servo moves about30degrees each time, although this can be
adjusted if your servo has had a "trimmer" added as part of the
In the image shown the standard servo is connected to the 3pins on the left.
The servo is mechanically mounted so the servo arm activates the camera shutter
the right are 2x 3pin connections, one for the battery (3 to 5.5volts) and one
for the modified pan servo.
clickPAN provides the electronic heart of these systems, you need to add the
mechanical "rig" to hold the servo and camera. If you would rather buy
a kit of parts look at www.brooxes.com or www.kapshop.com
More Information: Operating Manual, Servo
servo finger shutter and servo pan control:
Many cameras can be remote controlled, so you should consider clickPAN-IR
clickPAN-ADJUST allows you to continuously vary the time between shots from 3
to 30seconds (The standard clickPAN-SERVO can be set to 5 or 10 seconds). Simply plugs in
series with the battery connected to clickPAN-SERVO, adjustment is via a 22turn
More information: Operating Manual.
Order in addition to the clickPAN-SERVO you require.